dmesg - Western Digital WD1001FALS-4

Return To Western Digital WD1001FALS-4 System Information

microcode: microcode updated early to revision 0x1f, date = 2018-05-08
Linux version 4.15.0-96-generic (buildd@lgw01-amd64-004) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #97-Ubuntu SMP Wed Apr 1 03:25:46 UTC 2020 (Ubuntu 4.15.0-96.97-generic 4.15.18)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
Disabled fast string operations
x86/fpu: x87 FPU will use FXSAVE
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] reserved
BIOS-e820: [mem 0x0000000000090000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000773fffff] usable
BIOS-e820: [mem 0x0000000077400000-0x0000000077415fff] ACPI NVS
BIOS-e820: [mem 0x0000000077416000-0x000000007741efff] ACPI data
BIOS-e820: [mem 0x000000007741f000-0x000000007755efff] ACPI NVS
BIOS-e820: [mem 0x000000007755f000-0x00000000777fffff] ACPI data
BIOS-e820: [mem 0x0000000077800000-0x0000000077ffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000001e87ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Apple Inc. MacPro5,1/Mac-F221BEC8, BIOS     MP51.88Z.0084.B00.1708080528 08/08/17
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1e88000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-DFFFF write-protect
  E0000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 0080000000 mask FF80000000 uncachable
  1 base 0078000000 mask FFF8000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
e820: last_pfn = 0x77400 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fec60-0x000fec6f]
Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x1a87b91000, 0x1a87b91fff] PGTABLE
BRK [0x1a87b92000, 0x1a87b92fff] PGTABLE
BRK [0x1a87b93000, 0x1a87b93fff] PGTABLE
BRK [0x1a87b94000, 0x1a87b94fff] PGTABLE
BRK [0x1a87b95000, 0x1a87b95fff] PGTABLE
BRK [0x1a87b96000, 0x1a87b96fff] PGTABLE
BRK [0x1a87b97000, 0x1a87b97fff] PGTABLE
RAMDISK: [mem 0x334cd000-0x35a5dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 APPLE )
ACPI: XSDT 0x00000000775AE1C0 00007C (v01 APPLE  Apple00  00000084      01000013)
ACPI: FACP 0x00000000775AB000 0000F4 (v04 APPLE  Apple00  00000084 Loki 0000005F)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20170831/tbfadt-708)
ACPI: DSDT 0x00000000775A3000 003EE3 (v01 APPLE  Apple00  00050001 Loki 0000005F)
ACPI: FACS 0x0000000077415000 000040
ACPI: FACS 0x0000000077415000 000040
ACPI: ECDT 0x00000000775AD000 000053 (v01 APPLE  Apple00  00000001 Loki 0000005F)
ACPI: HPET 0x00000000775AA000 000038 (v01 APPLE  Apple00  00000001 Loki 0000005F)
ACPI: APIC 0x00000000775A8000 0001A8 (v02 APPLE  Apple00  00000000 Loki 0000005F)
ACPI: SSDT 0x000000007758E000 014F7C (v01 PmRef  CpuPPM   00003000 INTL 20061109)
ACPI: SSDT 0x0000000077589000 0006C5 (v02 OEM    NoHdau   00001000 INTL 20061109)
ACPI: MCFG 0x00000000775A7000 00003C (v01 APPLE  Apple00  00000001 Loki 0000005F)
ACPI: VFCT 0x000000007757A000 00E884 (v01                 00000001 AMD  31504F47)
ACPI: DMAR 0x0000000077579000 000068 (v01 APPLE  Apple00  00000001 Loki 0000005F)
ACPI: SSDT 0x000000007758D000 000B10 (v01 SataRe SataPri  00001000 INTL 20061109)
ACPI: SSDT 0x0000000077578000 000BD0 (v01 SataRe SataSec  00001000 INTL 20061109)
ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000001e87ffffff]
NODE_DATA(0) allocated [mem 0x1e87fd5000-0x1e87ffffff]
tsc: Fast TSC calibration using PIT
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x0000001e87ffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000008efff]
  node   0: [mem 0x0000000000090000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000773fffff]
  node   0: [mem 0x0000000100000000-0x0000001e87ffffff]
Reserved but unavailable: 98 pages
Initmem setup node 0 [mem 0x0000000000001000-0x0000001e87ffffff]
On node 0 totalpages: 31454109
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 7568 pages used for memmap
  DMA32 zone: 484352 pages, LIFO batch:31
  Normal zone: 483840 pages used for memmap
  Normal zone: 30965760 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 24 CPUs, 8 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x77400000-0x77415fff]
PM: Registered nosave memory: [mem 0x77416000-0x7741efff]
PM: Registered nosave memory: [mem 0x7741f000-0x7755efff]
PM: Registered nosave memory: [mem 0x7755f000-0x777fffff]
PM: Registered nosave memory: [mem 0x77800000-0x77ffffff]
PM: Registered nosave memory: [mem 0x78000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0x78000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:1
percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u262144
pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 
Built 1 zonelists, mobility grouping on.  Total pages: 30962616
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 123712976K/125816436K available (12300K kernel code, 2481K rwdata, 4264K rodata, 2432K init, 2712K bss, 2103460K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 39351 entries in 154 pages
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=24.
	Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
NR_IRQS: 524544, nr_irqs: 616, preallocated irqs: 16
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 5 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 40
DMAR: DRHD base: 0x000000fe710000 flags: 0x1
DMAR: dmar0: reg_base_addr fe710000 ver 1:0 cap c90780106f0462 ecap f0207e
DMAR: ATSR flags: 0x0
DMAR-IR: IOAPIC id 8 under DRHD base  0xfe710000 IOMMU 0
DMAR-IR: Enabled IRQ remapping in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 2393.912 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.82 BogoMIPS (lpj=9575648)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Disabled fast string operations
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 36K
smpboot: CPU0: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz (family: 0x6, model: 0x2c, stepping: 0x2)
Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
core: CPUID marked event: 'bus cycles' unavailable
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1
Disabled fast string operations
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 1: Machine Check: 0 Bank 8: ea1d7900008000b1
mce: [Hardware Error]: TSC 0 MISC 40000 
mce: [Hardware Error]: PROCESSOR 0:206c2 TIME 1587484020 SOCKET 1 APIC 20 microcode 1f
  #2
Disabled fast string operations
  #3
Disabled fast string operations
  #4
Disabled fast string operations
  #5
Disabled fast string operations
  #6
Disabled fast string operations
  #7
Disabled fast string operations
  #8
Disabled fast string operations
MDS CPU bug present and SMT on, data leak possible. See  for more details.
  #9
Disabled fast string operations
 #10
Disabled fast string operations
 #11
Disabled fast string operations
 #12
Disabled fast string operations
 #13
Disabled fast string operations
 #14
Disabled fast string operations
 #15
Disabled fast string operations
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 3
smpboot: Total of 16 processors activated (76605.01 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x77400000-0x77415fff] (90112 bytes)
PM: Registering ACPI NVS region [mem 0x7741f000-0x7755efff] (1310720 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 15:47:00, date: 04/21/20
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1587484020.324:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-0e] at [mem 0xe0000000-0xe0efffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Disabled all _OSI OS vendors
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: Added _OSI(Darwin)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \: Used as first EC
ACPI: \: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \: Used as boot ECDT EC to handle transactions
ACPI: BIOS _OSI(Darwin) query honored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-0e] at [mem 0xe0000000-0xe0efffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe0efffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: GPE 0x16 active on init
ACPI: Enabled 13 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fd])
acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0e] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [bus 00-fd]
pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
pci 0000:00:00.0: enabling Extended Tags
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: enabling Extended Tags
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: enabling Extended Tags
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: [8086:343a] type 00 class 0x060000
pci 0000:00:0d.1: [8086:343b] type 00 class 0x060000
pci 0000:00:0d.2: [8086:343c] type 00 class 0x060000
pci 0000:00:0d.3: [8086:343d] type 00 class 0x060000
pci 0000:00:0d.4: [8086:3418] type 00 class 0x060000
pci 0000:00:0d.5: [8086:3419] type 00 class 0x060000
pci 0000:00:0d.6: [8086:341a] type 00 class 0x060000
pci 0000:00:0d.7: [8086:341b] type 00 class 0x060000
pci 0000:00:0e.0: [8086:341c] type 00 class 0x060000
pci 0000:00:0e.1: [8086:341d] type 00 class 0x060000
pci 0000:00:0e.2: [8086:341e] type 00 class 0x060000
pci 0000:00:0e.3: [8086:341f] type 00 class 0x060000
pci 0000:00:0e.4: [8086:3439] type 00 class 0x060000
pci 0000:00:0f.0: [8086:3424] type 00 class 0x110100
pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
pci 0000:00:13.0: reg 0x10: [mem 0x90727000-0x90727fff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
pci 0000:00:16.0: [8086:3430] type 00 class 0x088000
pci 0000:00:16.0: reg 0x10: [mem 0x90700000-0x90703fff 64bit]
pci 0000:00:16.1: [8086:3431] type 00 class 0x088000
pci 0000:00:16.1: reg 0x10: [mem 0x90704000-0x90707fff 64bit]
pci 0000:00:16.2: [8086:3432] type 00 class 0x088000
pci 0000:00:16.2: reg 0x10: [mem 0x90708000-0x9070bfff 64bit]
pci 0000:00:16.3: [8086:3433] type 00 class 0x088000
pci 0000:00:16.3: reg 0x10: [mem 0x9070c000-0x9070ffff 64bit]
pci 0000:00:16.4: [8086:3429] type 00 class 0x088000
pci 0000:00:16.4: reg 0x10: [mem 0x90710000-0x90713fff 64bit]
pci 0000:00:16.5: [8086:342a] type 00 class 0x088000
pci 0000:00:16.5: reg 0x10: [mem 0x90714000-0x90717fff 64bit]
pci 0000:00:16.6: [8086:342b] type 00 class 0x088000
pci 0000:00:16.6: reg 0x10: [mem 0x90718000-0x9071bfff 64bit]
pci 0000:00:16.7: [8086:342c] type 00 class 0x088000
pci 0000:00:16.7: reg 0x10: [mem 0x9071c000-0x9071ffff 64bit]
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io  0x40e0-0x40ff]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io  0x40c0-0x40df]
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io  0x40a0-0x40bf]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0x90726000-0x907263ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x90720000-0x90723fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0x4080-0x409f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0x4060-0x407f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0x4040-0x405f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0x90725000-0x907253ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io  0x4138-0x413f]
pci 0000:00:1f.2: reg 0x14: [io  0x414c-0x414f]
pci 0000:00:1f.2: reg 0x18: [io  0x4130-0x4137]
pci 0000:00:1f.2: reg 0x1c: [io  0x4148-0x414b]
pci 0000:00:1f.2: reg 0x20: [io  0x4020-0x402f]
pci 0000:00:1f.2: reg 0x24: [io  0x8000-0x800f]
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x90724000-0x907240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x4000-0x401f]
pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io  0x4128-0x412f]
pci 0000:00:1f.5: reg 0x14: [io  0x4144-0x4147]
pci 0000:00:1f.5: reg 0x18: [io  0x4120-0x4127]
pci 0000:00:1f.5: reg 0x1c: [io  0x4140-0x4143]
pci 0000:00:1f.5: reg 0x20: [io  0x4110-0x411f]
pci 0000:00:1f.5: reg 0x24: [io  0x4100-0x410f]
pci 0000:01:00.0: [111d:8061] type 01 class 0x060400
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01-04]
pci 0000:02:02.0: [111d:8061] type 01 class 0x060400
pci 0000:02:02.0: enabling Extended Tags
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:04.0: [111d:8061] type 01 class 0x060400
pci 0000:02:04.0: enabling Extended Tags
pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:02:02.0: PCI bridge to [bus 03]
pci 0000:02:04.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1002:67ff] type 00 class 0x030000
pci 0000:05:00.0: reg 0x10: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:05:00.0: reg 0x18: [mem 0x90000000-0x901fffff 64bit pref]
pci 0000:05:00.0: reg 0x20: [io  0x3000-0x30ff]
pci 0000:05:00.0: reg 0x24: [mem 0x90600000-0x9063ffff]
pci 0000:05:00.0: reg 0x30: [mem 0x90640000-0x9065ffff pref]
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:05:00.1: [1002:aae0] type 00 class 0x040300
pci 0000:05:00.1: reg 0x10: [mem 0x90660000-0x90663fff 64bit]
pci 0000:05:00.1: enabling Extended Tags
pci 0000:05:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 05]
pci 0000:00:03.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:03.0:   bridge window [mem 0x90600000-0x906fffff]
pci 0000:00:03.0:   bridge window [mem 0x80000000-0x901fffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:09:00.0: [8086:10f6] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [mem 0x90500000-0x9051ffff]
pci 0000:09:00.0: reg 0x14: [mem 0x90520000-0x9052ffff]
pci 0000:09:00.0: reg 0x18: [io  0x2000-0x201f]
pci 0000:09:00.0: reg 0x1c: [mem 0x90530000-0x90533fff]
pci 0000:09:00.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:09:00.0: PME# supported from D0 D3hot
pci 0000:00:1c.2: PCI bridge to [bus 09]
pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.2:   bridge window [mem 0x90500000-0x905fffff]
pci 0000:0a:00.0: [8086:10f6] type 00 class 0x020000
pci 0000:0a:00.0: reg 0x10: [mem 0x90400000-0x9041ffff]
pci 0000:0a:00.0: reg 0x14: [mem 0x90420000-0x9042ffff]
pci 0000:0a:00.0: reg 0x18: [io  0x1000-0x101f]
pci 0000:0a:00.0: reg 0x1c: [mem 0x90430000-0x90433fff]
pci 0000:0a:00.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref]
pci 0000:0a:00.0: PME# supported from D0 D3hot
pci 0000:00:1c.3: PCI bridge to [bus 0a]
pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.3:   bridge window [mem 0x90400000-0x904fffff]
pci 0000:0b:00.0: [104c:823e] type 01 class 0x060400
pci 0000:0b:00.0: supports D1 D2
pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
pci 0000:00:1c.4:   bridge window [mem 0x90300000-0x903fffff]
pci 0000:0c:00.0: [104c:823f] type 00 class 0x0c0010
pci 0000:0c:00.0: reg 0x10: [mem 0x90304000-0x903047ff]
pci 0000:0c:00.0: reg 0x14: [mem 0x90300000-0x90303fff]
pci 0000:0c:00.0: supports D1 D2
pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:0b:00.0: PCI bridge to [bus 0c]
pci 0000:0b:00.0:   bridge window [mem 0x90300000-0x903fffff]
pci 0000:0d:00.0: [14e4:432b] type 00 class 0x028000
pci 0000:0d:00.0: reg 0x10: [mem 0x90200000-0x90203fff 64bit]
pci 0000:0d:00.0: enabling Extended Tags
pci 0000:0d:00.0: supports D1 D2
pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 0d]
pci 0000:00:1c.5:   bridge window [mem 0x90200000-0x902fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000cbfff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:05:00.0: vgaarb: setting as boot VGA device
pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:05:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x77400000-0x77ffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfed1a000-0xfed1afff] has been reserved
system 00:00: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed8bffe] could not be reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:00: [mem 0xfe600000-0xfe6fffff] has been reserved
system 00:00: [mem 0xfe800000-0xfe9fffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: [mem 0xff000000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: disabling [io  0x1640-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io  0x1000-0x1fff]
system 00:01: [io  0x0680-0x069f] has been reserved
system 00:01: [io  0x0800-0x080f] has been reserved
system 00:01: [io  0x0810-0x0817] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0500-0x053f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 3 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:09:00.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
pci 0000:0a:00.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
pci 0000:02:02.0: PCI bridge to [bus 03]
pci 0000:02:04.0: PCI bridge to [bus 04]
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:00:01.0: PCI bridge to [bus 01-04]
pci 0000:00:03.0: PCI bridge to [bus 05]
pci 0000:00:03.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:03.0:   bridge window [mem 0x90600000-0x906fffff]
pci 0000:00:03.0:   bridge window [mem 0x80000000-0x901fffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.1: PCI bridge to [bus 08]
pci 0000:09:00.0: BAR 6: assigned [mem 0x90540000-0x9057ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 09]
pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.2:   bridge window [mem 0x90500000-0x905fffff]
pci 0000:0a:00.0: BAR 6: assigned [mem 0x90440000-0x9047ffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 0a]
pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.3:   bridge window [mem 0x90400000-0x904fffff]
pci 0000:0b:00.0: PCI bridge to [bus 0c]
pci 0000:0b:00.0:   bridge window [mem 0x90300000-0x903fffff]
pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
pci 0000:00:1c.4:   bridge window [mem 0x90300000-0x903fffff]
pci 0000:00:1c.5: PCI bridge to [bus 0d]
pci 0000:00:1c.5:   bridge window [mem 0x90200000-0x902fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0e]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000cbfff window]
pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0x90600000-0x906fffff]
pci_bus 0000:05: resource 2 [mem 0x80000000-0x901fffff 64bit pref]
pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:09: resource 1 [mem 0x90500000-0x905fffff]
pci_bus 0000:0a: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:0a: resource 1 [mem 0x90400000-0x904fffff]
pci_bus 0000:0b: resource 1 [mem 0x90300000-0x903fffff]
pci_bus 0000:0c: resource 1 [mem 0x90300000-0x903fffff]
pci_bus 0000:0d: resource 1 [mem 0x90200000-0x902fffff]
pci_bus 0000:0e: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:0e: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0e: resource 7 [mem 0x000c4000-0x000cbfff window]
pci_bus 0000:0e: resource 8 [mem 0x80000000-0xdfffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (256 != 64), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 38468K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x73400000-0x77400000] (64MB)
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=25 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: AER enabled with IRQ 25
pcieport 0000:00:03.0: AER enabled with IRQ 26
pcieport 0000:00:07.0: AER enabled with IRQ 27
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0x80000000, mapped to 0x        (ptrval), using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x4138 ctl 0x414c bmdma 0x4020 irq 17
ata2: SATA max UDMA/133 cmd 0x4130 ctl 0x4148 bmdma 0x4028 irq 17
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0x4128 ctl 0x4144 bmdma 0x4110 irq 17
ata4: SATA max UDMA/133 cmd 0x4120 ctl 0x4140 bmdma 0x4118 irq 17
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0x90726000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.0-96-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 16, io mem 0x90725000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.0-96-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.15.0-96-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.15.0-96-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 19, io base 0x000040a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.15.0-96-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.15.0-96-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.15.0-96-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 4.15.0-96-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
mce: Using 9 MCE banks
RAS: Correctable Errors collector initialized.
microcode: sig=0x206c2, pf=0x1, revision=0x1f
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1166743243, 0)->(1177704616, -10961373)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 244b473b43e18b01f00e37a87f2ecd28620f0244'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
ima: Allocated hash algorithm: sha1
evm: HMAC attrs: 0x1
  Magic number: 0:393:791
rtc_cmos 00:02: setting system clock to 2020-04-21 15:47:01 UTC (1587484021)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 3-2: new low-speed USB device number 2 using uhci_hcd
usb 6-1: new low-speed USB device number 2 using uhci_hcd
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
usb 3-2: New USB device found, idVendor=413c, idProduct=3012
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Dell USB Optical Mouse
usb 3-2: Manufacturer: Dell
usb 6-1: New USB device found, idVendor=413c, idProduct=2105
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: Dell USB Keyboard
usb 6-1: Manufacturer: Dell
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATAPI: HL-DT-ST DVD-RW GH61N, PA03, max UDMA/100
ata1.01: ATA-8: WDC WD1001FALS-41Y6A0, 05.03D06, max UDMA/133
ata1.01: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/133
scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RW GH61N     PA03 PQ: 0 ANSI: 5
sr 0:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
scsi 0:0:1:0: Direct-Access     ATA      WDC WD1001FALS-4 3D06 PQ: 0 ANSI: 5
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 >
sd 0:0:1:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 2393.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821267f49, max_idle_ns: 440795240327 ns
Freeing unused kernel image memory: 2432K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1880K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
hidraw: raw HID events driver (C) Jiri Kosina
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:09:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ssb: Found chip with id 0x4322, rev 0x01 and package 0x0A
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x17, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x10, vendor 0x4243)
ssb: Core 2 found: PCI-E (cc 0x820, rev 0x0B, vendor 0x4243)
ssb: Core 3 found: PCI (cc 0x804, rev 0x0E, vendor 0x4243)
ssb: Core 4 found: USB 2.0 Device (cc 0x81A, rev 0x05, vendor 0x4243)
ssb: Core 5 found: UNKNOWN (cc 0x8FF, rev 0x00, vendor 0x4243)
ssb: Core 6 found: Internal Memory (cc 0x80E, rev 0x03, vendor 0x4243)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
e1000e 0000:09:00.0 0000:09:00.0 (uninitialized): registered PHC clock
firewire_ohci 0000:0c:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x2
input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/0003:413C:3012.0001/input/input2
hid-generic 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1a.0-2/input0
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/0003:413C:2105.0002/input/input3
e1000e 0000:09:00.0 eth0: (PCI Express:2.5GT/s:Width x1) e8:06:88:ce:86:33
e1000e 0000:09:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:09:00.0 eth0: MAC: 3, PHY: 8, PBA No: 140FFF-0FF
e1000e 0000:0a:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
hid-generic 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
ssb: Sonics Silicon Backplane found on PCI device 0000:0d:00.0
e1000e 0000:0a:00.0 0000:0a:00.0 (uninitialized): registered PHC clock
usb 5-1: new full-speed USB device number 2 using uhci_hcd
e1000e 0000:0a:00.0 eth1: (PCI Express:2.5GT/s:Width x1) e8:06:88:ce:86:e1
e1000e 0000:0a:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:0a:00.0 eth1: MAC: 3, PHY: 8, PBA No: 140FFF-0FF
e1000e 0000:0a:00.0 enp10s0: renamed from eth1
e1000e 0000:09:00.0 enp9s0: renamed from eth0
clocksource: Switched to clocksource tsc
usb 5-1: New USB device found, idVendor=0a5c, idProduct=4500
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: BRCM2046 Hub
usb 5-1: Manufacturer: Apple Inc.
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 3 ports detected
firewire_core 0000:0c:00.0: created device fw0: GUID 70cd60fffe113ede, S800
firewire_core 0000:0c:00.0: phy config: new root=ffc1, gap_count=5
usb 5-1.1: new full-speed USB device number 3 using uhci_hcd
usb 5-1.1: New USB device found, idVendor=05ac, idProduct=8215
usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1.1: Product: Bluetooth USB Host Controller
usb 5-1.1: Manufacturer: Apple Inc.
usb 5-1.1: SerialNumber: 78CA39CCFFAF
random: fast init done
random: crng init done
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting Uncomplicated firewall...
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[382]: Received request to flush runtime journal from PID 1
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd-journald[382]: File /var/log/journal/782c2b8139e14156a5bafb452354565f/system.journal corrupted or uncleanly shut down, renaming and replacing.
audit: type=1400 audit(1587484047.006:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=574 comm="apparmor_parser"
audit: type=1400 audit(1587484047.006:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=571 comm="apparmor_parser"
audit: type=1400 audit(1587484047.006:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=570 comm="apparmor_parser"
audit: type=1400 audit(1587484047.006:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=570 comm="apparmor_parser"
audit: type=1400 audit(1587484047.006:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=570 comm="apparmor_parser"
audit: type=1400 audit(1587484047.006:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=578 comm="apparmor_parser"
audit: type=1400 audit(1587484047.006:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=567 comm="apparmor_parser"
audit: type=1400 audit(1587484047.006:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=567 comm="apparmor_parser"
audit: type=1400 audit(1587484047.006:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=567 comm="apparmor_parser"
audit: type=1400 audit(1587484047.006:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=567 comm="apparmor_parser"
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i5500_temp 0000:00:14.3: Sensor seems to be disabled
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:16.0: can't derive routing for PCI INT A
ioatdma 0000:00:16.0: PCI INT A: no GSI
ioatdma 0000:00:16.1: can't derive routing for PCI INT B
ioatdma 0000:00:16.1: PCI INT B: no GSI
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
ioatdma 0000:00:16.2: can't derive routing for PCI INT C
ioatdma 0000:00:16.2: PCI INT C: no GSI
cfg80211: Loading compiled-in X.509 certificates for regulatory database
ioatdma 0000:00:16.3: can't derive routing for PCI INT D
ioatdma 0000:00:16.3: PCI INT D: no GSI
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
SSE version of gcm_enc/dec engaged.
ioatdma 0000:00:16.4: can't derive routing for PCI INT A
ioatdma 0000:00:16.4: PCI INT A: no GSI
ioatdma 0000:00:16.5: can't derive routing for PCI INT B
ioatdma 0000:00:16.5: PCI INT B: no GSI
ioatdma 0000:00:16.6: can't derive routing for PCI INT C
ioatdma 0000:00:16.6: PCI INT C: no GSI
b43-phy0: Broadcom 4322 WLAN found (core revision 16)
ioatdma 0000:00:16.7: can't derive routing for PCI INT D
ioatdma 0000:00:16.7: PCI INT D: no GSI
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 4
b43-phy0: Found Radio: Manuf 0x17F, ID 0x2056, Revision 3, Version 0
Broadcom 43xx driver loaded [ Features: PNL ]
applesmc: key=397 fan=6 temp=68 index=68 acc=0 lux=0 kbd=0
applesmc applesmc.768: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
amdkcl: loading out-of-tree module taints kernel.
amdkcl: module verification failed: signature and/or required key missing - tainting kernel
Warning: fail to get symbol ksys_sync, replace it with kcl stub
b43 ssb0:0: Direct firmware load for b43/ucode16_mimo.fw failed with error -2
b43 ssb0:0: Direct firmware load for b43/ucode16_mimo.fw failed with error -2
b43 ssb0:0: Direct firmware load for b43-open/ucode16_mimo.fw failed with error -2
b43 ssb0:0: Direct firmware load for b43-open/ucode16_mimo.fw failed with error -2
b43-phy0 ERROR: Firmware file "b43/ucode16_mimo.fw" not found
b43-phy0 ERROR: Firmware file "b43-open/ucode16_mimo.fw" not found
b43-phy0 ERROR: You must go to  and download the correct firmware for this driver version. Please carefully read all instructions on this website.
snd_hda_intel 0000:05:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:05:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card1/input4
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card1/input5
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card1/input8
snd_hda_codec_realtek hdaudioC0D0: ALC889A: SKU not ready 0x400000f0
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889A: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
snd_hda_codec_realtek hdaudioC0D0:    dig-in=0x1f
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: BCM: chip id 254 build 0518
Bluetooth: hci0: BCM: product 05ac:8215
Bluetooth: hci0: BCM: features 0x00
Bluetooth: hci0: cameron-H97N
[drm] amdgpu kernel modesetting enabled.
[drm] amdgpu version: 5.2.0.19.50
[drm] OS DRM version: 4.15.0
CRAT table not found
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
checking generic (80000000 500000) vs hw (80000000 10000000)
fb: switching to amdgpudrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (POLARIS11 0x1002:0x67FF 0x1462:0x8A91 0xCF).
[drm] register mmio base: 0x90600000
[drm] register mmio size: 262144
[drm] PCIE atomic ops is not supported
[drm] add ip block number 0 
[drm] add ip block number 1 
[drm] add ip block number 2 
[drm] add ip block number 3 
[drm] add ip block number 4 
[drm] add ip block number 5 
[drm] add ip block number 6 
[drm] add ip block number 7 
[drm] add ip block number 8 
kfd kfd: skipped device 1002:67ff, PCI rejects atomics
ATOM BIOS: 113-C98121-H01
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 512 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
amdgpu 0000:05:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
amdgpu 0000:05:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 128bits GDDR5
[TTM] Zone  kernel: Available graphics memory: 61878900 KiB
[TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400500000).
[drm] Chained IB support enabled!
amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
[drm] Found UVD firmware Version: 1.130 Family ID: 16
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB:	 214000
[drm] DM_PPLIB:	 387000
[drm] DM_PPLIB:	 843000
[drm] DM_PPLIB:	 1011000
[drm] DM_PPLIB:	 1080000
[drm] DM_PPLIB:	 1126000
[drm] DM_PPLIB:	 1168000
[drm] DM_PPLIB:	 1196000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB:    engine_max_clock: 119600
[drm] DM_PPLIB:    memory_max_clock: 175000
[drm] DM_PPLIB:    level           : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB:	 300000
[drm] DM_PPLIB:	 625000
[drm] DM_PPLIB:	 1750000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB:    engine_max_clock: 119600
[drm] DM_PPLIB:    memory_max_clock: 175000
[drm] DM_PPLIB:    level           : 8
[drm] Display Core initialized with v3.2.56!
[drm:dm_helpers_parse_edid_caps [amdgpu]] *ERROR* Couldn't read SADs: -2
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
[drm] fb mappable at 0x80A30000
[drm] vram apper at 0x80000000
[drm] size 5242880
[drm] fb depth is 24
[drm]    pitch is 5120
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
amdgpu 0000:05:00.0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.36.0 20150101 for 0000:05:00.0 on minor 0
Adding 4063228k swap on /dev/sda5.  Priority:-2 extents:1 across:4063228k FS
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp10s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
e1000e: enp10s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): enp10s0: link becomes ready
systemd-journald[382]: File /var/log/journal/782c2b8139e14156a5bafb452354565f/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3154 > 3131), lowering kernel.perf_event_max_sample_rate to 63250
perf: interrupt took too long (3950 > 3942), lowering kernel.perf_event_max_sample_rate to 50500
perf: interrupt took too long (4955 > 4937), lowering kernel.perf_event_max_sample_rate to 40250
perf: interrupt took too long (6293 > 6193), lowering kernel.perf_event_max_sample_rate to 31750
perf: interrupt took too long (7906 > 7866), lowering kernel.perf_event_max_sample_rate to 25250
perf: interrupt took too long (9921 > 9882), lowering kernel.perf_event_max_sample_rate to 20000
perf: interrupt took too long (12761 > 12401), lowering kernel.perf_event_max_sample_rate to 15500
perf: interrupt took too long (16018 > 15951), lowering kernel.perf_event_max_sample_rate to 12250
kauditd_printk_skb: 53 callbacks suppressed
audit: type=1400 audit(1587487092.147:65): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/9066/usr/lib/snapd/snap-confine" pid=15772 comm="apparmor_parser"
audit: type=1400 audit(1587487092.147:66): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/9066/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=15772 comm="apparmor_parser"
audit: type=1400 audit(1587487093.183:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=15774 comm="apparmor_parser"
audit: type=1400 audit(1587487093.595:68): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=15778 comm="apparmor_parser"
audit: type=1400 audit(1587487093.703:69): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-characters" pid=15777 comm="apparmor_parser"
audit: type=1400 audit(1587487093.715:70): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.chromium" pid=15775 comm="apparmor_parser"
audit: type=1400 audit(1587487093.751:71): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=15779 comm="apparmor_parser"
audit: type=1400 audit(1587487093.847:72): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=15776 comm="apparmor_parser"
audit: type=1400 audit(1587487093.855:73): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.canonical-livepatch" pid=15783 comm="apparmor_parser"
audit: type=1400 audit(1587487093.855:74): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=15782 comm="apparmor_parser"
kauditd_printk_skb: 21 callbacks suppressed
audit: type=1400 audit(1587487107.267:96): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/9066/usr/lib/snapd/snap-confine" pid=15996 comm="apparmor_parser"
audit: type=1400 audit(1587487107.311:97): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/9066/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=15996 comm="apparmor_parser"
audit: type=1400 audit(1587487108.319:98): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.canonical-livepatch.hook.configure" pid=16009 comm="apparmor_parser"
audit: type=1400 audit(1587487108.547:99): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=16010 comm="apparmor_parser"
audit: type=1400 audit(1587487108.851:100): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.canonical-livepatch.canonical-livepatchd" pid=16008 comm="apparmor_parser"
audit: type=1400 audit(1587487108.883:101): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.canonical-livepatch.canonical-livepatch" pid=16007 comm="apparmor_parser"
audit: type=1400 audit(1587487109.139:102): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.ffmpeg.ffprobe" pid=16005 comm="apparmor_parser"
audit: type=1400 audit(1587487109.151:103): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.ffmpeg.ffmpeg" pid=16003 comm="apparmor_parser"
audit: type=1400 audit(1587487109.247:104): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.chromium" pid=16000 comm="apparmor_parser"
audit: type=1400 audit(1587487109.279:105): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.gnome-logs" pid=16019 comm="apparmor_parser"
kauditd_printk_skb: 26 callbacks suppressed
audit: type=1400 audit(1587487140.827:132): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-characters.gnome-characters" pid=16214 comm="apparmor_parser"
audit: type=1400 audit(1587487141.035:133): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.chromium" pid=16208 comm="apparmor_parser"
audit: type=1400 audit(1587487141.123:134): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-system-monitor" pid=16217 comm="apparmor_parser"
audit: type=1400 audit(1587487141.279:135): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-calculator.gnome-calculator" pid=16212 comm="apparmor_parser"
audit: type=1400 audit(1587487141.483:136): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-logs.gnome-logs" pid=16216 comm="apparmor_parser"
audit: type=1400 audit(1587487141.547:137): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-logs" pid=16215 comm="apparmor_parser"
audit: type=1400 audit(1587487141.583:138): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-characters" pid=16213 comm="apparmor_parser"
audit: type=1400 audit(1587487141.743:139): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.gnome-system-monitor.gnome-system-monitor" pid=16218 comm="apparmor_parser"
audit: type=1400 audit(1587487141.795:140): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.gnome-calculator" pid=16211 comm="apparmor_parser"
audit: type=1400 audit(1587487142.583:141): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.chromium.chromium" pid=16210 comm="apparmor_parser"
perf: interrupt took too long (20252 > 20022), lowering kernel.perf_event_max_sample_rate to 9750
show_signal_msg: 1 callbacks suppressed
pool[17021]: segfault at 8 ip 00007f9b06294025 sp 00007f9adbffe480 error 4 in libgio-2.0.so.0.5600.4[7f9b0621c000+195000]
sched: RT throttling activated

Return To Western Digital WD1001FALS-4 System Information